49
6. Squeeze the bottle until a tiny drop forms at
the tip. Touch the drop to the front edge of
the yellow window of the test strip. Do not put
control solution on top of the test strip.
When you see
flash, there is enough control
solution in the test strip.
7. Wipe the tip of the bottle with a tissue. Cap the
bottle tightly.
8. The control result appears on the display, along
with the control bottle symbol and flashing L. Do
not remove the test strip yet. Press
once to
mark the control result as a Level 1. Press
a
second time to mark the control result as a
Level 2.
or
50705_05853397002_EN.indb 49 4/24/12 8:32 AM
To Next Page
Loading...
