Accu-Chek ACTIVE User Manual

109
Symbols, problems and error messages
12.3 Error messages
If an error message is displayed, turn the meter off.
Depending on the situation, either by briey pressing
the M or S button or by removing the test strip from
the meter.
If these error messages occur frequently, contact
your customer support and service centre.
If your meter has been dropped, it can also lead to
error messages. In this case also contact your cus-
tomer support and service centre.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH