Accu-Chek ACTIVE User Manual

108
Symbols, problems and error messages
The meter is turned on, but the display is blank.
The display is defective.
Please contact your customer support and service
centre.
The clock has stopped or the clock is slow.
The meter was exposed to a temperature below
-10 °C and the battery is beginning to freeze.
Turn the meter off. Ensure that the ambient tem-
perature is between +10 and +40 °C and wait for
the meter to adapt to that temperature.
The time is shown as 0:00 or 0:00am and the
date as 0‑ 0.
The meter was exposed to a temperature below

-10 °C and the battery is beginning to freeze.
Turn the meter off. Ensure that the ambient
temperature is between +10 and +40 °C and wait
for the meter to adapt to that temperature.
You have not set the time and date.

Set the time and date (see Chapter 3).

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH