Accu-Chek ACTIVE User Manual

99
Measurement and storage conditions
Avoid sudden changes in light conditions while
testing. The ashlight of a camera, for exam-
ple, can lead to incorrect results.
Keep the meter away from very strong light
sources (e.g. direct sunlight, studio lighting,
etc.). These may stop the meter from function-
ing correctly and lead to error messages.
11.4 Sources of interference
Strong electromagnetic elds may interfere
with the proper operation of the meter. Do not
use the meter in close proximity to a strong
electromagnetic eld.
To avoid electrostatic discharge, do not use
the meter in a very dry environment, especially
one in which synthetic materials are present.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH