AccuBANKER D500 - Counterfeit Detection Process

To Next Page

To Previous Page

3. Operation (continued)

3.4 Counterfeit Detection

There are four counterfeit detection methods: Illustration (Illus.), Infrared

(IR), Ultraviolet (UV), and Magnetic (MG). All four methods work together

at all times.

1) Illustration Detection

This method checks for the illustration feature on the banknote. If the

illustration is not detected the machine will alert with a triple beeping sound

and reject the banknote by ejecting it to the front of the machine. Also, the

Illus. error icon will flash on the display.

2) IR Detection

This method checks for the illustration feature on the banknote. If the

illustration is not detected the machine will alert with a triple beeping sound

and reject the banknote by ejecting it to the front of the machine. Also, the

Illus. error icon will flash on the display.

3) UV Detection

This method checks the banknote against an ultraviolet light source. If the

UV properties are not detected the machine will alert with a triple beeping

sound and reject the bill by ejecting it to the front of the machine. Also, the

UV error icon will flash on the display.

4) MG Detection

This method checks the banknote for magnetic ink properties. If the magnetic

ink is not detected the machine will alert with a triple beeping sound and

reject the bill by ejecting it to the front. Also, the MG error icon will flash on

the display.

Other manuals for AccuBANKER D500