22
Viewing the High and Low Alarms
To view the current alarm settings, press the ALARM button to enter the alarm mode. HI will be displayed in
the time area. At the same time Alarm time parameters of out/indoor temperature/humidity, rain, feels like,
wind gust, wind average, and dew point are displayed.
Press ALARM button again to view the LOW alarms along with the alarm clock time in the same way as with
the HI alarms.
Press the SNOOZE button at any time to return to the normal mode.
Setting the Alarms
Press ALARM button to enter the alarm mode.
Next, press and hold the SET button for three seconds. The first alarm parameter will begin flashing (alarm
hour).
To save the alarm setting and proceed to the next alarm parameter, Press (do not hold) the SET button.
To adjust the alarm parameter, press the [+] or [-] button to increase or decrease the alarm settings, or press
and hold the [+] or [-] button for three seconds to increase or decrease the alarm settings rapidly.
Press the ALARM button (the alarm icon will appear) to turn the alarm on and off.
Press the SNOOZE button once at any time to return to the normal mode. After 30 seconds of inactivity, the
alarm mode will time out and return to normal mode.
The following is a list of the individual alarm parameters that are set (in order):
1. Alarm hour (alarm 1)
2. Alarm minute (alarm 1)
3. Alarm hour (alarm 2)
4. Alarm minute (alarm 2)
5. Wind gust high alarm
6. Wind average high alarm
7. Outdoor temperature high alarm
8. Outdoor temperature low alarm
9. Outdoor humidity high alarm
10. Outdoor humidity low alarm
11. Outdoor feels like high alarm
12. Outdoor feels like low alarm
13. Outdoor dew point high alarm
14. Outdoor dew point low alarm
15. Rainfall (1hr) high alarm
16. Rainfall (24h) high alarm
17. Absolute pressure high alarm (ABS)
18. Absolute pressure low alarm (ABS)
19. Relative pressure high alarm (REL)
20. Relative pressure low alarm (REL)
21. Indoor temperature high alarm
To Next Page
Loading...
