Accusound ES 100 Wireless User Manual

Specifications ES 100 Eclipse Series Wireless Loudspeakers
Power 120 Watts power handling all speakers wired
Frequency Response 125~20000Hz
Efficiency 88 dB@1watt 1 metre
Impedance 8 Ohms nominal
Components 2 x 75mm paper cone drivers
1 x 25mm silk soft dome tweeter
Connections Gold plated push terminals
Dimensions Front and rear H x W x D (mm) with base
Centre H x W x D (mm)
Weight Front kg each, Centre kg, Rear kg each
Transmitter Voltage 100v ~ 240 Volts ~50/60 Hz + ~ - 20%
Transmission 2.4000 ~ 2.4835 GHz with Auto Seeking channels
Rear Speaker Amplifier 100 watts output with adjustable volume level
Colour Satin black finish
Standby Power Uses 1 watt or less in auto standby mode
ES 100 Powered Subwoofer Specifications
Power Amplifier 300 watt RMS
Voltage 100 ~240 Volt 50/60Hz +~- 20%
Frequency Response 25~150Hz
Driver 1 x 250mm paper cone driver
Volume Variable 0~10
Phase Switchable 0~180 degrees
Crossover Control Variable 50~150 Hz
Main Power Switch Switches Off, On
Standby Switches On, Auto, Off.
Uses 1 watt or less in auto standby mode
Fuse Protection 2 amp
Input L + R RCA, LFE and High Level inputs
Dimensions H x W x D (mm)
Weight kg
Colour Satin black finish
This system complies with AS/NZ4268: 2003
Accusound Australia Pty, Ltd
Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232
Ph (02) 9545-3905 Fax (02) 9545-3902
Email:
info@accusound.com.au
www.accusound.com.au
2013
Eclipse Series Home
Theatre System
ES 100 Wireless
Instruction Manual
Please read these instructions carefully
before turning on your speakers.
Contents
Carton 1
2 x Front speakers
1 x Centre speaker / Wireless Transmitter
2 x Wireless surround speakers
4 x Front & rear speaker bases
3 x AC Power leads for wireless transmitter and 2 surrounds
8 x 30mm screws for bases
Carton 2
1 x Powered Subwoofer

Accusound ES 100 Wireless Specifications

General

Brand	Accusound
Model	ES 100 Wireless
Category	Home Theater System
Language	English

Summary

Unpacking and Initial Setup

Unpacking Procedure

Step-by-step guide for unpacking components and checking against the contents list.

Room Placement

Guidelines for positioning front, centre, and surround speakers for optimal sound.

Speaker Configuration and Calibration

Speaker Levels and Calibration

Manual setup of speaker levels on receiver, avoiding auto-calibration for wireless systems.

Breaking In Your Speakers

Recommended break-in period for optimal sound quality and component refinement.

Subwoofer Operation and Controls

Subwoofer Control Panel

Explanation of Phase, Off/Auto/On, Crossover, and Volume controls.

Subwoofer Connections

Details on LFE, Line In, and High Level In inputs for connecting the subwoofer.

Connections and Wiring

Speaker Terminals and Connections

How to connect speaker wires to terminals and receiver outputs.

Wireless Transmitter Setup

Connecting the centre speaker to the transmitter and setting up wireless surround speakers.

Component Specifics and Diagrams

Wireless Receiver Overview

Description of the wireless receiver unit and its controls.

Wiring Diagram

Visual representation of system connections between receiver, speakers, and transmitter.