Accusound ES40 Eclipse Series User Manual

Specifications ES40 Eclipse Series Wireless Loudspeakers
Power 120 Watts power handling all speakers wired
Frequency Response 125~20000Hz
Efficiency 88 dB@1watt 1 metre
Impedance 8 Ohms nominal
Components 2 x 75mm (3 inch) paper cone drivers
1 x 25mm (1 inch) silk soft dome tweeter
Connections Gold plated push & screw terminals
Dimensions Front and rear 1000 H x 190 W x 215 D (mm) with base
Centre 110 H x 360 W x 160 D (mm)
Weight Front 6kg each, centre 4.5kg, rear 6.5kg each
Transmitter Voltage 240 Volts ~50 Hz +~- 10%
Transmission 2.4000 ~ 2.4835 GHz with 8 stereo channels
Rear Speaker Amplifier 100 watts output with adjustable volume level
Colour Black piano PVC finish
ES40 Powered Subwoofer Specifications
Power Amplifier Australian safety standard 250 watt RMS
Voltage 240 Volt 50 Hz +~- 10%
Frequency Response 25~200Hz
Driver 1 x 250mm (10 inch) paper cone driver
Volume Variable 0~10
Phase Variable 0~180 degrees
Crossover Control Variable 40~200 Hz
Bass Extension Variable 0~6 dB
Main Power Switch Switches Off, On
Standby Switches Off, Auto, On
Fuse Protection 2.5 amp
Input RCA socket
Output RCA socket
Dimensions 450 H x 350 W x 410 D (mm)
Weight 19.5kg
Colour Black piano finish top and base
This system complies with AS/NZ4268: 2003
Accusound Australia Pty, Ltd
Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232
Ph (02) 9545-3905 Fax (02) 9545-3902
Email: info@accusound.com.au
www.accusound.com.au
2008
8
Quality Sound by Design
Eclipse Series Home
Theatre System
ES 40 Wireless
Instruction Manual
Please read these instructions carefully
before turning on your speakers.
Contents
Carton 1
2 x Front speakers
1 x Centre speaker / Wireless Transmitter
2 x Wireless surround speakers
4 x Front & rear speaker bases
3 x AC Power leads for wireless transmitter and 2 surrounds
These are packed in the end of the foam inserts
8 x 30mm screws for glass bases
4 x Rubber pads for base of centre speaker
Both these are located in the Instruction manual
Carton 2
1 x Powered Subwoofer

Accusound ES40 Eclipse Series Specifications

General

Brand	Accusound
Model	ES40 Eclipse Series
Category	Home Theater System
Language	English

Summary

Eclipse Series ES40 Loudspeaker Specifications

Power and Frequency Response

Details on power handling, frequency range, and efficiency.

Impedance and Components

Information on speaker impedance and driver configuration.

Connections, Dimensions, and Weight

Physical attributes and connection types for speakers.

Transmitter and Rear Speaker Amplifier

Voltage, transmission frequency, and rear amp details.

ES40 Powered Subwoofer Specifications

Specifications for the powered subwoofer unit.

Contents of Package

Lists items included in cartons 1 and 2.

System Setup and Operation

Unpacking and Initial Setup

Instructions for unpacking components and attaching bases.

Room Placement Guidelines

Recommendations for optimal speaker positioning in a room.

Speaker Level Calibration

Setting speaker volume levels and avoiding auto-calibration issues.

Subwoofer Connection and Power

Connecting the subwoofer and its power settings.

Alternative Wired Connection

Guidance on bypassing wireless for surround speakers.

Speaker Break-In Procedure

Recommended period for new speakers to reach full potential.

Subwoofer Control Panel Functions

Volume and Crossover Controls

Adjusting subwoofer volume and crossover frequency.

Bass Extension and Phase Settings

Enhancing bass and synchronizing subwoofer phase.

Speaker and Transmitter Connections

Speaker Terminal Connection

Proper method for connecting speaker wires.

Front Speaker and Centre/Transmitter Wiring

Connecting front speakers and the centre/transmitter unit.

Power Switch and Transmitter Controls

Operating power and channel controls on the transmitter.

Wireless Surround Speaker Setup

Connecting and initially setting up wireless surround speakers.

Channel Adjustment for Interference

Changing wireless channels to resolve interference.