Accusound ES 25 User Manual

.
Specifications ES 25 Eclipse Series Loudspeakers
Speaker Specifications:
Power Rating 120 Watts Power Handling
Frequency Response 125~21000Hz
Efficiency 88 dB@1watt 1 Metre
Impedance 8 Ohms Nominal
Components: 2 x 75mm or 3” Paper Cone Drivers
1 x 25mm or 1” Silk Soft Dome Tweeter
Gold plated push terminals
Wall Mount Wall Bracket + Wall Plate
Dimensions 280mm (H) x110mm (W) x95mm (D)
Weight 2.4Kgs
Colours Black Piano Finish
ES 25 Powered Subwoofer Specifications:
Power Amplifier CE Safety Approved 250 watt Continuous
Voltage 240 Volt 50 Hz
Frequency Response 25~200Hz
Driver 1 x 10” or 250mm Woofer
Volume Variable 0~10
Phase Variable 0~180 Degrees
Crossover Control Variable 40~200 Hz
Power Switch Switches Off, On
Fuse Protection 2.5 Amp
Input RCA Socket
Output RCA Socket
Dimensions 430mm (H) x 338mm (W) x 402mm (D)
Weight 20.5Kgs
Colours Black Piano Finish
Accusound Australia Pty, Ltd Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232 Ph (02) 9545-3905 Fax (02) 9545-3902
Email: info@accusound.com.au Website: accusound.com.au
Quality Sound By Design
Eclipse Series Home
Theatre Satellite System
ES 25
Instruction Manual
Read these Instructions before
you connect your speakers

Accusound ES 25 Specifications

General

Brand	Accusound
Model	ES 25
Category	Home Theater System
Language	English

Summary

Speaker and Subwoofer Specifications

Speaker Specifications

Detailed technical specifications for the Accusound ES 25 Eclipse Series satellite speakers.

ES 25 Powered Subwoofer Specifications

Technical details for the Accusound ES 25 Eclipse Series powered subwoofer unit.

Setup and Placement Guidance

Room Placement

Guidance on optimal positioning of satellite and surround speakers within the listening environment.

Wiring Diagram

Visual representation of how to connect the Accusound ES 25 speakers to a receiver.

Connections and Subwoofer Operation

Speaker Cable and Connection

Instructions on using appropriate speaker cables and connecting them to the speakers and receiver.

Subwoofer Connection

Details on connecting the ES 25 powered subwoofer, including input and output sockets.

Subwoofer Control Panel

Explanation of the controls on the powered subwoofer: Volume, Crossover, Base Extension, and Phase.

Mounting and Speaker Break-in

Speaker Wall Mounting

Instructions for mounting the speakers on the wall using the supplied bracket.

Stand Mounting

Guidance on mounting the speakers using a universal speaker stand.

Breaking In Your Speakers

Procedure and importance of the break-in period for optimal speaker performance.