Accusound ES 80 Wireless User Manual

Specifications ES80 Eclipse Series Wireless Loudspeakers
Power 120 Watts power handling all speakers wired
Frequency Response 125~20000Hz
Efficiency 88 dB@1watt 1 metre
Impedance 8 Ohms nominal
Components 2 x 75mm (3 inch) paper cone drivers
1 x 25mm (1 inch) silk soft dome tweeter
Connections Gold plated push terminals
Dimensions Front and rear 1018H x 135W x 132D (mm) with base
Centre 110H x 360W x 145D (mm)
Weight Front kg each, centre kg, rear kg each
Transmitter Voltage 240 Volts ~50 Hz +~- 10%
Transmission 2.4000 ~ 2.4835 GHz with Auto Seeking channels
Rear Speaker Amplifier 100 watts output with adjustable volume level
Colour Black piano & PVC finish
Standby Uses 1 watt of power in auto standby mode
ES 80.1 Powered Subwoofer Specifications Upgrade
Amplifier Digital Switch Mode Amp. 300 Watts RMS
Voltage 240 Volt 50 Hz +~- 20%
Frequency Response 25~200 Hz
Driver 1 x 250mm (10 inch) paper cone driver
Passive Radiator 1 x 250mm (10 inch) paper cone radiator
Volume Variable 0~10
Phase Variable 0~180 degrees
Crossover Control Variable 40~200 Hz
Main Power Switch Switches Off, On
Standby Switches Auto, On. Uses1 watt of power in standby
Fuse Protection 2.5 amp
Input RCA socket
Output RCA socket
Dimensions 350H x 320W x375D (mm)
Weight 19kg
Colour Black piano finish top
This system complies with AS/NZ4268: 2003
Accusound Australia Pty, Ltd
Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232
Ph (02) 9545-3905 Fax (02) 9545-3902
Email: info@accusound.com.au
www.accusound.com.au
2012
Quality Sound by Design
Eclipse Series Home
Theatre System
ES 80 Wireless
Instruction Manual
Please read these instructions carefully
before turning on your speakers.
Contents
Carton 1
2 x Front speakers
1 x Centre speaker / Wireless Transmitter
2 x Wireless surround speakers
4 x Front & rear speaker bases
3 x AC Power leads for wireless transmitter and 2 surrounds
8 x 30mm screws for bases
Carton 2
1 x Powered Subwoofer

Accusound ES 80 Wireless Specifications

General

Brand	Accusound
Model	ES 80 Wireless
Category	Home Theater System
Language	English

Summary

Room Placement

Speaker Levels Auto Calibration

Procedure for calibrating speaker levels and warnings against incorrect auto calibration.

Subwoofer Setup

Instructions for setting up the subwoofer for optimal performance.

Wireless Surround and Subwoofer Connection

Guidelines for connecting wireless surround speakers and the subwoofer.

Speaker Break-in Period

Guidance on the initial usage and break-in period for the speakers.

ES 80.1 Wireless Subwoofer

Specific instructions and information for the ES 80.1 Wireless Subwoofer.

Subwoofer Control Panel

Volume Control

Adjusting the subwoofer volume for optimal sound balance.

Crossover Control

Setting the crossover frequency to blend subwoofer with main speakers.

Phase Control

Adjusting subwoofer phase for synchronization with other speakers.

Speaker Connections and Setup

Speaker Terminals

Instructions for connecting speaker wires to terminals.

Front Speaker Connections

Connecting the front speakers to the amplifier.

Centre Speaker and Wireless Transmitter

Connecting the centre speaker and wireless transmitter.

Power Switch and Standby

Information on the power switch and standby mode.

Wireless Surround Speaker Setup

Steps for setting up wireless surround speakers.

Wireless Transmitter Operation

Details on the wireless transmitter's built-in centre speaker function.