How to prime Ace ACE5S 1/2 HP?
- CChristopher RodriguezAug 5, 2025
To prime your Ace Water Pump, stop the motor, remove the pressure gauge bushing, and fill the case and suction line with water. Also, ensure all connections are airtight.
How to prime Ace ACE5S 1/2 HP?
To prime your Ace Water Pump, stop the motor, remove the pressure gauge bushing, and fill the case and suction line with water. Also, ensure all connections are airtight.
What to do if Ace ACE5S 1/2 HP does not deliver rated capacity?
If your Ace Water Pump is not delivering its rated capacity, use a water-level tester while the pump is operating.
What to do if Ace Water Pump delivers water but will not shut off?
If your Ace Water Pump delivers water but will not shut off, use a water-level tester while the pump is operating to troubleshoot the issue.
What to do if Ace ACE5S 1/2 HP motor fails or does not operate properly?
If the motor of your Ace Water Pump fails or does not operate properly, return the pump/motor unit to the place of purchase with proof of purchase for exchange.
Brand | Ace |
---|---|
Model | ACE5S 1/2 HP |
Category | Water Pump |
Language | English |
Critical safety instructions and warnings to prevent injury or property damage during installation.
Guide to measuring well operating depth and identifying well type for proper pump selection.
Procedures for setting up the pump and selecting the correct operating voltage for the motor.
Instructions for electrical wiring, safety precautions, and recommended wire/fuse sizes.
Guidelines for piping, materials, and steps for installing a shallow well pump.
Specific steps for installing ACE5C and ACE10C convertible pumps, including ejector kit assembly.
Instructions for installing a pump using a well point system, including driving the point and connecting piping.
Detailed procedure for installing ACE5C and ACE10C convertible pumps for deep wells, including ejector assembly.
Steps for assembling the deep well pump system, connecting pipes, and sealing the well.
Essential steps to properly prime the pump and ensure initial operation without damage.
Common pump problems, their causes, and solutions for effective diagnosis.
Procedures for draining the pump and piping for maintenance or protection against freezing.
List of components and their corresponding keys for ACE5C and ACE10C convertible pump models.
Information on available repair parts and kits for convertible and shallow well pumps.
List of components and their corresponding keys for the ACE10S shallow well pump model.
Details and contents of the overhaul kit specifically for the ACE10S 1 HP pump.
Terms and conditions of the limited warranty, including duration and eligibility requirements.
Specific conditions and situations not covered by the warranty, and limitations on remedies.