To Next PageTo Next PageHow to prime Ace Water Pump?
To prime your Ace Water Pump, stop the motor, remove the pressure gauge bushing, and fill the case and suction line with water. Also, ensure all connections are airtight.
What to do if Ace Water Pump does not deliver rated capacity?
If your Ace Water Pump is not delivering its rated capacity, use a water-level tester while the pump is operating.
What to do if Ace ACE5C Convertible 1/2 HP Water Pump delivers water but will not shut off?
If your Ace Water Pump delivers water but will not shut off, use a water-level tester while the pump is operating to troubleshoot the issue.
What to do if Ace ACE5C Convertible 1/2 HP Water Pump motor fails or does not operate properly?
If the motor of your Ace Water Pump fails or does not operate properly, return the pump/motor unit to the place of purchase with proof of purchase for exchange.
Crucial safety guidelines and warnings to follow before starting pump installation.
Steps to measure the well's operating depth for proper pump selection and installation.
Method to measure water depth and identify shallow vs. deep well pump requirements.
Initial pump setup, inspection, and guide to correctly setting the pump's voltage.
Instructions for electrical connections and a chart for recommended wire and fuse sizes.
Guidelines for all piping connections, emphasizing airtightness for proper pump operation.
Step-by-step instructions for installing shallow well pumps, including required materials.
Specific procedures for installing a pump system utilizing a well point.
Detailed guide for installing ACE5C and ACE10C convertible pumps in deep wells.
Essential steps to fill the pump and system with water to ensure correct operation and prevent damage.
A checklist to diagnose and resolve common pump problems like no priming, low capacity, or motor issues.
Instructions on how to properly drain the pump and piping for maintenance or seasonal protection.
Illustrated breakdown of parts for ACE5C, ACE10C, and ACE5S pump models.
List of essential repair parts and kits available for purchase for pump maintenance.
Details the warranty period, coverage, and eligibility requirements for ACE pumps.
Explains conditions not covered by warranty and limitations on remedies and damages.
Crucial safety guidelines and warnings to follow before starting pump installation.
Steps to measure the well's operating depth for proper pump selection and installation.
Method to measure water depth and identify shallow vs. deep well pump requirements.
Initial pump setup, inspection, and guide to correctly setting the pump's voltage.
Instructions for electrical connections and a chart for recommended wire and fuse sizes.
Guidelines for all piping connections, emphasizing airtightness for proper pump operation.
Step-by-step instructions for installing shallow well pumps, including required materials.
Specific procedures for installing a pump system utilizing a well point.
Detailed guide for installing ACE5C and ACE10C convertible pumps in deep wells.
Essential steps to fill the pump and system with water to ensure correct operation and prevent damage.
A checklist to diagnose and resolve common pump problems like no priming, low capacity, or motor issues.
Instructions on how to properly drain the pump and piping for maintenance or seasonal protection.
Illustrated breakdown of parts for ACE5C, ACE10C, and ACE5S pump models.
List of essential repair parts and kits available for purchase for pump maintenance.
Details the warranty period, coverage, and eligibility requirements for ACE pumps.
Explains conditions not covered by warranty and limitations on remedies and damages.
General| Brand | Ace |
|---|---|
| Model | ACE5C Convertible 1/2 HP |
| Category | Water Pump |
| Language | English |
