Need help?Do you have a question about the Acea NovoCyte and is the answer not in the manual?
General| Type | Flow Cytometer |
|---|---|
| Number of Lasers | Up to 3 |
| Fluorescence Channels | Up to 13 |
| Data Acquisition Rate | Up to 35, 000 events/second |
| Software | NovoExpress |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Detection Technology | Fluorescence detection |
| Lasers | Blue (488 nm), Violet (405 nm) |
| Sample Input | 96-well plate, tubes |
| Throughput | Up to 35, 000 events per second |
| Sample Throughput | Up to 96 samples in microplates |
| Detection | Fluorescence |
| Cell Size Range | 0.5 μm to 50 μm |
Details the default optical setup for the 3005 model, including lasers and detectors.
Details the default optical setup for the 3000 model, including lasers and detectors.
Details the default optical setup for the 2070R model, including lasers and detectors.
Details the default optical setup for the 2060R model, including lasers and detectors.
Details the default optical setup for the 2000R model, including lasers and detectors.
Details the default optical setup for the 2110V model, including lasers and detectors.
Details the default optical setup for the 2090V model, including lasers and detectors.
Details the default optical setup for the 2070V model, including lasers and detectors.
Details the default optical setup for the 1000 model, including lasers and detectors.
Details the default optical setup for the 1040 model, including lasers and detectors.
Details the default optical setup for the 1050 model, including lasers and detectors.
Details the default optical setup for the 3000RYB model, including lasers and detectors.
To Next Page
