Removing the Air Conditioner from the Window
Introduction to Refrigerants R32
1. Site Safety
2. Operation Safety
Turn the air conditioner off and unplug the power cord.
Remove the sash seal from between windows, and unscrew sash lock.
Remove the screws installed through the frame and frame lock.
Close (slide) the side panels into frame.
Keeping a firm grip on air conditioner, raise the sash and carefully "rock" air conditioner
backward to drain any condensate water in base of unit. Be careful not to spill any
remaining water while lifting unit from window.
Store parts with the air conditioner in the box.
Before installing the appliance, you must read the manual carefully to get the safety
information and notes.
When filling the combustible refrigerant, any of your rude operations may cause serious
injury or injuries to human body or bodies and object or objects.
Requirements for the total weight of filled refrigerant and the area of a room to be
equipped with an air conditioner.
A leak test must be done after the installation is completed.
It is a must to do the safety inspection before maintaining or repairing
an air conditioner using combustible refrigerant in order to ensure that
the fire risk is reduced to minimum.
It is necessary to operate the machine under a controlled procedure in
order to ensure that any risk arising from the combustible gas or vapor
during the operation is reduced to minimum.
Open Flames Prohibited Open Flames Prohibited
Mind Static Electricity Don't use mobile phoneMust Wear Protective Clothing
and anti-static gloves
Ventilation Necessary
Your home in sync
12
To Next Page
Loading...
