6
Connecting the Audio Cable (For AL1715
m and AL1715 bm)
1. Connect the audio cable to the " LINE OUT " jack on
your PC's audio card or to the front panel's “AUDIO
OUT” jack of your CD ROM drive. (See Fig. 1-7)
2. Connect the other end of the audio cable to the LCD
Monitor's " LINE IN " jack.
Figure 1-7
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.
To Next Page
Loading...
