- 42 -
OSD Message:
Outline:
The description for OSD Message :
Item Description
Auto Config
Please Wait
When User Press Hot-Key “Auto”, will show this message, and the monitor do the auto config
function.
Input Not
Supported
When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor support range,
will show this message. This message will be flying.
Cable Not
Connected
When the video cable is not connected, will show this message. This message will be flying.
No Signal When the video cable is connected, but the is no active signal input, will show this message, then
enter power saving.
LOGO:
When the monitor is power on, the LOGO will be showed in the center.
Item of Factory menu
Vendor may customize design and add adjustment items Factory menu as far as all required items are included.
To Next Page
Loading...
