5
Image
adjustment
for analog
The image settings of your LCD monitor were adjusted to their optimal status for analog TV
before shipment. (See Page 9). If you want to adjust the image settings to suit your personal
preference, follow the steps below:
1. Click Menu to display the OSD window as shown in the following figure.
2. Click Plus or Minus to select the function to be adjusted as shown in the following
figure.
3. Click the Menu again to select the function to be adjusted.
4. Click Plus or Minus to change current settings.
5. To exit the OSD window, select "
" to close and save changes. To change other
settings, repeat steps 2-4.
(Analog)
Horizontal/Vertical Adjustment
Bright/Contract Adjustment
Phase/Clock pulse Adjustment
Color Temp. Adjustment
Language Selection
OSD Setting
Auto Adjustment
Message
Restore
Exit
To Next Page
Loading...
