2-16 System Utilities
Remove HDD/BIOS Password Utilities 0
This section provides details for removing HDD/BIOS passwords.
Remove HDD Password as follows:
If the HDD password is incorrectly entered three times, an error is generated, you will
see below menu (Figure 2-16).
Figure 2-16. HDD Security
To reset the HDD password, perform the followings:
1. Select Enter Unlock Password option.
Figure 2-17. Select Item
An Encode key is generated for unlocking utilities. Make note if this key.
Figure 2-18. Unlock Password
1. Execute the UnlockHD.EXE file to create the unlock code in DOS Mode using the format
<UnlockHD [Encode code]> with the code noted in the previous step.
Example: UnlockHD 87456887
The command generates a password which can be used for unlocking the HDD.
Password: 38534209
Enter the password from the Step 1 to unlock the HDD (Figure 2-19).
To Next Page
Loading...
