Acer Aspire 4310 - Computer Security Features; Security Lock and Password Protection

Chapter 3 55
Removing the WLAN Board Module
1. See “Removing the Battery Pack” on page 51.
2. See “Removing the Lower Cover” on page 53.
3. Detach the wireless board barcode label from the WLAN board.
4. Disconnect the two antenna cables from the WLAN board, then move the antennas away from the board.
5. Remove the two screws (A) on the WLAN board to release the WLAN board.
Step Size (Quantity) Color Torque
1~2 M2 x L4 (2) Black 1.6 kgf-cm