Chapter 3 53
8. Disconnect the modem board cable from the main board.
9. Remove the two screws holding the modem board.
10. Disconnect the modem board from the main board then remove it.
11. Disconnect the modem cable from the modem board.
12. Remove the three screws holding the CPU heatsink.
13. Remove the CPU heatsink from the main board.
14. Use a flat headed screwdriver to release the CPU socket lock (see the picture on the middle and on the
right).
15. Remove the CPU from the socket carefully.
16. Remove the six screws fastening the VGA heatsink.
17. Then remove the VGA heatsink from the main board.
To Next Page
Loading...
