38 Chapter 2
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1. Press F2 during boot to enter the Setup Menu.
2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3. Execute the IFLASH.BAT batch file to update BIOS.
The flash process begins as shown.
PhoenixBIOS Setup Utility
Information Main Advanced Security Power Boot AMD Exit
Item Specific Help
Boot priority order: Use <
↑
> or <
↓
> to
1. IDE0 : Hitachi HTS542525K9SA00- (S select a device, then
2. IDE1 : Slimtype DVD A DS8A2S- (S2 press <F6> to move it
3. PCI LAN: MBA v11.0.3 Slot 0600 up the List, or <F5>
4. USB HDD : to move it down the
5. USB FDD : list. Press <Esc> to
6. USB KEY : escape the menu.
7. USB CD/DVD ROM :
F1 Help
↑↓
Select Item F5/F6 Change Item F9 Setup Default
ESC Exit
←→
Select Menu Enter Select
X
Submenu F10 Save and Exit
To Next Page
Loading...
