15
English
If you prefer to set the boot priority for long-term use, you should select the
submenu.
1 Turn on your computer and insert the first system recovery disc into the
optical disc drive. Restart your computer.
2 During startup when the Acer logo shows, press the
key to enter
, where you can set system parameters.
3 Use the left and right arrow keys to select the
submenu.
4 Use the up and down arrow keys to select the
device.
5 Use the
key to move the
device to the highest boot priority, or
use the
key to move other devices to a lower boot priority. Ensure that
the
device is the highest priority.
6 Press the key to enter the submenu, press the key to
. Press the key again to select . The system will
reboot.
7 When you reboot, Windows will be installed from the recovery disc.
8 Insert the second recovery disc when prompted, then follow the onscreen
prompts to complete the restore.
9 Remove the recovery disc from the optical drive once the restore is
complete. Do this before rebooting your computer.
To Next Page
Loading...
