46 Chapter 3
Removing the Hard Disk Drive 2 (HDD2) Module
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the SD Dummy Card” on page 45.
3. Release the two captive screws on the hard disk 2 module cover.
4. Lift and remove the HDD2 bay cover.
NOTE: The HDD2 module is available in certain models only. If your model does not have an HDD2, please
skip to the next section and disregard the steps for removing the HDD2 module below.
To Next Page
Loading...
