48 Chapter 3
Removing the Back Cover
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the SD Dummy Card” on page 45.
3. See “Removing the Hard Disk Drive 2 (HDD2) Module” on page 46.
4. Release the six captive screws securing the back cover.
5. Carefully lift and remove the back cover.
Removing the Hard Disk Drive 1 (HDD1) Module
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the SD Dummy Card” on page 45.
3. See “Removing the Hard Disk Drive 2 (HDD2) Module” on page 46.
4. See “Removing the Back Cover” on page 48.
To Next Page
Loading...
