Chapter 3 53
10. Release the wireless LAN card from its connector and detach the card.
Removing the DIMM Module
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the SD Dummy Card” on page 45.
3. See “Removing the Hard Disk Drive 2 (HDD2) Module” on page 46.
4. See “Removing the Back Cover” on page 48.
5. See “Removing the Hard Disk Drive 1 (HDD1) Module” on page 48.
6. See “Removing the TV Tuner Card (for certain models only)” on page 50.
7. See “Removing the Wireless LAN Card” on page 52.
8. Push out the latches on both sides of the DIMM socket to release the DIMM.
9. Remove the DIMM module(s).
To Next Page
Loading...
