Chapter 2 16
Miscellaneous
Parameter Description Option
AHCI Port1/2/3/4/5/6 Displays the status of auto detection of the AHCI device.
Clock to All DIMM/
PCI/PCIE
This item allows you to enable or disable the Clock to all DIMM/PCI/PCIE. Enabled
Disabled
Spread Spectrum Enables or disables the reduction of the mainboard’s EMI. Note: Remember to
disable the Spread Spectrum feature if you are overclocking. A slight jitter can
introduce a temporary boost in clock speed causing the overclocked processor
to lock up.
Enabled
Disabled
Bootup Num-lock Selects power on state for Num Lock. On
Off
USB Beep Message Enables or disables BIOS to display error beeps or messages during USB
device enumeration.
Enabled
Disabled
To Next Page
Loading...
