16 Chapter 2
as those in your computer.
BIOS setup utility menus
The Setup utility has five menus for configuring the various system functions. These include: Information,
Main, Security, Boot, and Exit.
IMPORTANT:The screenshots used in this section are for illustration only. The values displayed may not be
the same as those in your computer. Actual screen information varies by model, installed features,
and location.
-In the descriptive table following each of the screenshot, settings in boldface are the default settings.
Information
The Information menu displays a summary of your computer hardware information. These information are
necessary for troubleshooting and may be required when asking for technical support.
Parameter Description
CPU Type Displays the processor model and speed.
CPU Speed Displays the processor speed.
IDE0 Model Name Displays the model name of the hard drive installed on the primary IDE
master.
IDE0 Serial Number Displays the serial number of the hard drive installed on the primary IDE
master.
ATAPI Model Name Displays the model name of the installed optical drive.
System BIOS Version Displays system BIOS version.
VGA BIOS Version Displays the VGA firmware version.
KBC Version Displays the keyboard controller version.
Serial Number Displays the system serial number.
Asset Tag Number Displays the system asset tag number
Product Name Displays the official model name of the computer.
Manufacturer Name Displays the name of the computer manufacturer.
UUID Number Displays the computer’s UUID (universally unique identifier). UUID is an
identifier standard used in software construction, standardized by the
Open Software Foundation (OSF) as part of the Distributed Computing
Environment (DCE).
Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook http://faqp.ru/
HTTP://FAQP.RU/ - Схемы, сервис мануалы, инструкции по разборке ноутбука
To Next Page
Loading...
