Reassembly
Assembly is the exact reverse of the disassembly procedure, but with a couple of cautions.
When you replace the mainboard be sure to slip it UNDER the clip at the left rear under the LCD cable.
Metal clip over mainboard, and LCD cable
Once the mainboard is in place, tuck the LCD cable back down into its spot.
Bring the speaker cable up over the front of the mainboard. Reconnect it and then put the yellow tape
back in place.
When reinstalling the WIFI board, reroute the antenna wires into their proper place so they don’t interfere
with anything else. See the photo in the disassembly section above.
To Next Page
Loading...
