Chapter 3 113
Replacing the Keyboard
Replacing the 3G Module
1. Turn the computer over. Insert the Keyboard FFC in
to the Mainboard connector.
2. Close the FFC locking latch as shown.
3. Turn the Keyboard over and slide it in the direction of the arrow.
IMPORTANT: Ensure the four securing pins are correctly located.
4. Press down around the edges of the Keyboard to engage the locking latches.
1. Turn the computer over. Insert the 3G Module in to
the Mainboard socket.
2. Replace the single securing screw.
To Next Page
Loading...
