76 Chapter 3
Removing the LCD Bezel
1. See “Removing the LCD Module” on page 71.
2. Remove the four screw caps and screws from the LCD Bezel.
NOTE: The two center screw caps at the top of the bezel are for protection only.
3. Starting from the inside right edge, pry the bezel away from the panel. Continue moving along the top, prying
the bezel away from the LCD Module. If necessary, use a plastic pry to release the corners of the bezel.
Step Size Quantity Screw Type
LCD Bezel M2*4 4
To Next Page
Loading...
