Using a Bluetooth connection - 81
The Bluetooth adapter in your computer is now enabled and ready for you
to add Bluetooth devices.
To disable your computer’s Bluetooth adapter, do the following:
1. Press the W
indows key
+ <W> and then type Wireless.
2. In the results, click on Wireless.
3. Click the toggle under Bluetooth to enable/disable it.
Adding a Bluetooth device
Every new device must first be "paired" with your computer’s Bluetooth
adapter. This means it must first be authenticated for security purposes.
You only need to pair once. After that, simply turning on the Bluetooth
adapter of both devices will connect them.
From the notification area, click the Bluetooth icon, and select Add a
Bluet
ooth Device.
To Next Page
Loading...
