Acer Aspire X3810 - System Disassembly; Disassembly Requirements and Pre-Procedure

Chapter 2 23
GPI09 Configuration Set the GPIO9 function. WOL Enabled
High
Low
HDA Controller Enables or disables the HDA controller. Enabled
Disabled
SMBUS Controller Enables or disables the SMBUS controller. Enabled
Disabled
SLP_S4# Min. Assertion
Width
Set the SLP_S4 minimum assert time. 4 to 5 seconds
3 to 4 seconds
2 to 3 seconds
1 to 2 seconds
Restore On AC Power Loss Enables or disables the system to reboot after a power failure or
interrupt occurs.
Power Off
Power On
Last State
PCIE Port 0 to 4 Enables or disables the selected PCIE port. Auto
Enabled
Disabled
PCIE High Priority Port Set the PCIE high priority port. Disabled
Port 0, 1, 2, 3, 4, or
5
PCIE Port 0 to 5 IOxAPIC
Enable
Enables or disables the selected PCIE Port IOxAPIC. Disabled
Enabled
Parameter Description Option