38 Chapter 3
Removing the Optical Drive
1. See “Removing the Side Panel” on page 34.
2. See “Removing the Front Bezel” on page 35.
3. See “Removing the Heat Sink Fan Assembly” on page 36.
4. See “Removing the Processor” on page 37.
5. Remove the HDD-ODD bracket.
(1). Disconnect the data and power cables from the optical drive.
(2). Remove the two screws (B) from the HDD-ODD bracket.
Screw (Quantity) Color Torque Part No.
6-32 xL6 (2) Silver 5.7 to 6.3 kgf-cm 86.1A324.5R0
To Next Page
Loading...
