34 Chapter 3
Removing the Optical Drive
1. See “Removing the Side Panel” on page 30.
2. See “Removing the Front Bezel” on page 31.
3. See “Removing the Heat Sink Fan Assembly” on page 32.
4. See “Removing the Processor” on page 33.
5. Remove the HDD-ODD bracket.
(1). Disconnect the data and power cables from the optical drive.
(2). Remove the two screws (B) from the HDD-ODD bracket.
Screw (Quantity) Color Torque Part No.
6-32 xL6 (2) Silver 5.7 to 6.3 kgf-cm 86.00J44.C60
X3910
To Next Page
Loading...
