Chapter 2 19
Frequency/Voltage Control
Parameter Description Option
Clock to All DIMM/PCI/PCIE Enables or disables the system to detect the DIMM/PCI/PCIE clock
automatically during bootup.
Enabled
Disabled
Spread Spectrum Enables or disables the reduction of the mainboard’s EMI.
Note: Remember to disable the Spread Spectrum feature if you are
overclocking. A slight jitter can introduce a temporary boost in clock
speed causing the overclocked processor to lock up.
Enabled
Disabled
:Move Enter:Select
F1:General Help F9:Optimized Defaults
+ :Value//- ESC:Exit
F10:Save
Help Item
[Enabled]
[Enabled]
CMOS Setup Utility - Copyright © 1985-2010, American Megatrends, Inc.
Frequency/Voltage Control
Enable Clock to All
DIMM/PCI/PCIE.
Frequency/Voltage Control
Clock to All DIMM/PCI/PCIE
Spread Spectrum
To Next Page
Loading...
