Chapter 3 39
Removing the Hard Disk Drive
1. See “Removing the Side Panel” on page 29.
2. See “Removing the Front Bezel” on page 30.
3. Remove the HDD-ODD bracket. See page 36.
(1). Place the bracket on a clean, static-free work surface.
(2). Remove the four screws (D) that secure the HDD module.
(3). Slide the HDD out of the bracket.
Screw (Quantity) Color Torque Part No.
#6-32*3/16 NI (4) Silver 5.7 to 6.3 kgf-cm 86.5A5B6.012
To Next Page
Loading...
