Chapter 3 47
(2). Pull the bracket with the cables out of the unit, as shown.
6. Remove the card reader board.
(1). Remove the two screws (B) that secure the card reader board to the bracket.
(2). Pull the board out of the bracket.
Screw (Quantity) Color Torque Part No.
#6-32 L6 NI (2) Silver 3.5 to 4.5 kgf-cm 86.00J44.C60
NOTE: The card has been highlighted with a yellow rectangle as above image shows.
Please detach the card and follow local regulations for disposal.
To Next Page
Loading...
