42 Chapter 3
Removing an Expansion Card
This section includes instructions on how to remove a TV tuner card and a VGA card.
To remove the network card:
1. See “Removing the Side Panel” on page 31.
2. Remove the screw (A) that secures the card to the chassis.
3. Pull the card out of its mainboard connector.
Screw (Quantity) Color Torque Part No.
#6-32 L5 BZN (3) Black 5.7 to 6.3 kgf-cm 86.00J07.B60
NOTE: The card has been highlighted with a yellow rectangle as above image shows.
Please detach the card and follow local regulations for disposal.
To Next Page
Loading...
