Acer AT310 F1 Series - Page 155

137
Setting up alerts
You can set up notifications to be sent via SNMP traps or via email.
Setting up SNMP traps
1 On the Alerts page, click Modify.
2 Select Snmp Trap from the Alert Type drop-down menu.
3 Specify the event severity, such as Critical or Warning.
4 Enter the IP information.
5 Click Save.
Setting up email notifications
1 On the Alerts page, click Modify.
2 From the Alert Type menu, select e-mail.
3 Specify the event severity, such as Critical or Warning.
4 Enter the recipient’s email address.
5 Enter a subject and message.
6 Click Save.