1 System tour
2
System notes
AT310 F1 server is a single-processor tower server designed to meet the
needs of various network environments. The server board is based on
Intel® 2-chip architecture and supports the Intel Core i3, Intel Xeon
3400 series or Pentium processors. The server system features six DDR3-
1333 DIMM slots that support both Unbufferred ECC and Registered
DIMMs, four PCI-E slots and one 32-bit/33 MHz PCI slot, onboard SATA
SW RAID with RAID 0, 1, 5 or 10 support, onboard Baseboard
Management Controller (BMC), iKVM feature, and an integrated VGA
with 32 MB memory. The server accepts up to three optical devices and
four hot-pluggable SATA/SAS hard disk drives, configurable for RAID 0,
1, 5 or 10.
The server’s tool-less chassis design allows for easy hardware access and
set up in both tower and rack-mount configurations.
To Next Page
Loading...
