1 System tour
4
6 Power button Press to turn the server on/off, or to
put it in standby mode.
7 Power state
indicator
Indicates the power status. (green)
8 System ID
indicator
Indicates the system ID button on the
rear panel is pressed or activated
through IPMI. (blue)
9 HDD activity
indicator
Indicates the status of a system hard
disk drive. (green)
10 System status/fault
indicator
Indicates the status of the systems
operations. (green/amber)
11 LAN port 1 activity
indicator
Indicates the system network 1
connection status. (green)
12 LAN port 2 activity
indicator
Indicates the system network 2
connection status. (green)
13 USB 2.0 ports Connect to USB devices.
No. Icon Component Description
To Next Page
Loading...
