Acer AT3201W - Page 22

Chapter 3 51
Removing the LCD Module
Removing the Button Key/Power Lens/IR Lens
1. Remove the button key.
2. Remove the power lens.
3. Remove the IR lens.
4. Remove the two screws securing the left LCD bracket.
5. Remove the two screws securing the right LCD bracket.
6. Remove the sixteen screws securing the LCD module.
7. Remove the LCD module from the unit.
8. Remove the two screws securing the chassis middle.
9. Remove the other screw securing the chassis middle.
10. Disconnect the cable.
11. Remove the chassis middle.
12. Remove the three screws securing the left and right LCD bracket.