Acer B246WL

English
32
ATTACHING/ REMOVING THE BASE
Install: Align the base with the stand and push the base towards the top of
the monitor, and then rotate the base clockwise. Tighten the screw clockwise.
Remove: Reverse the steps to remove the base.
Warning:
• Actionsbelowarenotallowedwhilemovingandwalking:highadjustment,tilt,
swivel and pivot because of safety requirement.
• Topreventfragilepanelbroken,whenmovinganddisassemblingtheproduct,it
must pull the monitor head to the top at first and place the horizontal direction on
the table.