Acer CB242Y - Declaration of Conformity

ACER CB242Y
9
S6
Disassemble the MF from
panel.
Extract FFC wire from the panel as picture 1.
Unlock 9 screws from the MF as picture 2.
Disassemble the MF from the panel. Extract the lamp wire from the panel as the picture 3.
PICTURE 1 PICTURE 2 PICTURE 3
S7
Disassemble I/F BD and
P/BD from SHD.
Unlock 2 hex screws from the SHD and unlock 5 PCBA screws as picture 1.
Extract P/BD wire from the IF BD, disassemble the IF BD from the SHD, and extract the
FFC from the IF BD as picture 2.
Disassemble the P/BD from the SHD and extract P/BD wire from the P/BD as picture 3.
PICTURE 1 PICTURE 2 PICTURE 3
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.