Acer CB272U - Installation Guide; Connecting Signal and Audio Cables

English
Installation
1. Turn off your computer and unplug your computer's power cord.
2. 

thumbscrews on the signal cable connector.
3. 
the audio cable.
4. Insert the monitor power cable into the power port at the back of the monitor.
 Plug the power cords of your computer and your monitor into a nearby electrical outlet.
HDMI 1(2.0)HDMI 2(2.0) DP
Note: Audio output is only for audio output model. Please check user manual for more instruction.

*For the installation of replaceable parts, please refer to the above installation instructions.

For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/support