1-4 Disassembly Procedures
Pre-disassembly Instructions 0
Do the following prior to starting any maintenance procedures:
1. Place the system on a stable work surface.
2. Remove the power adapter from the USB Type-C port (A) as shown in Figure 1-1 or
from the USB Type-C port (C) as shown in Figure 1-2.
3. Remove the microSD card from the microSD card slot (B) (Figure 1-1).
4. Remove all cables from system.
Figure 1-1. AC Adapter Outlet & microSD Card Slot
Figure 1-2. AC Adapter Outlet
Make sure the system is completely powered off.
To Next Page
Loading...
