1-12 Disassembly Procedures
WLAN (Wireless Local Area Network) Module Removal 0
Prerequisite:
Battery Pack Removal
1. Find the WLAN module (A) on the top assembly (Figure 1-12).
Figure 1-12. Component Location
2. Disconnect WLAN antennas (B) connected to the WLAN card (Figure 1-13).
3. Remove one (1) screw (C) securing the WLAN module in place (Figure 1-13).
Figure 1-13. WLAN Pins & Screw Location
To Next Page
Loading...
