1-20 Disassembly Procedures
3. Close the top assembly and lift both LCD hinges until they are fully extended
(Figure 1-27).
Figure 1-27. LCD Module Removal
4. Disconnect the 20-pin USB board FFC (A) from the mainboard and USB board
connectors (Figure 1-28).
5. Disconnect the 50-pin USB board FFC (B) from the mainboard and USB board
connectors (Figure 1-28).
6. Disconnect the touchpad FFC from the mainboard connector (C) (Figure 1-28).
7. Disconnect the keyboard FPC from the mainboard connector (D) (Figure 1-28).
Figure 1-28. LCD Module Removal