Disassembly Procedures 1-21
USB board FFC (Flexible Flat Circuit), touchpad FFC, and keyboard FPC
(Flexible Printed Circuit) can be damaged if removed while the mainboard
connector the USB board connector are locked.
8. Detach the tape (E) securing the cables (Figure 1-29).
Figure 1-29. LCD Module Removal
9. Disconnect the eDP cable from the mainboard connector (F). Then unroute the cable
from the cable guides as shown in Figure 1-30.
10. Disconnect the WLAN antennas cables from the WLAN module connectors (G). Then
unroute the cables from the cable guides as shown in Figure 1-30.
Figure 1-30. LCD Module Removal
To Next Page
Loading...
