Acer Chromebook R 11 C738T - I;O Board Removal

1-8 Disassembly Procedures
I/O Board Removal 0
Prerequisite:
Base Cover Removal
1. Find the USB board (C) on the base cover (Figure 1-8).
2. Disconnect the IO Board FFC (A) from the IO Board connecter (B) and remove it.
3. Remove the one (1) screw (D) securing the IO board in place (Figure 1-8).
Figure 1-8. IO Board Screw Location
4. Remove the USB board from the base cover (Figure 1-9).
Figure 1-9. IO Board Removal
D
A
C
B
A
E
B
WEEE Annex VII Component:
I/O board